Can't Change Absorb Time

[ClassicCrazy]

Yeah you can run your other questions about setting here - screen shots are always helpful.
I noticed last time I did reset that some of the settings stuck - like you mentioned. No problem.
I don't pay attention to the Aux led indicators on the Classic since I have them remote and look at my other monitoring programs to tell what status they are in.
The only other thing about the Whizbang is putting it on the shunt with the purple wire in the correct orientation. It says in instructions. I did it wrong last time I put one together but just was able to swap the cables on the shunt because of space getting at the whizbang was harder to do.
Larry

[Tucker Ridge]

Hey Larry,

I like how you mounted your shunt and WBJ. Purple wire toward the batteries!

I am attaching a PDF (ClassicConfigPatrick.pdf) with the settings (screenshots and pics for those not accessible
via local app). Any recommendations will be very much appreciated.

Thank you -Patrick

[ClassicCrazy]

Hey Larry,

I like how you mounted your shunt and WBJ. Purple wire toward the batteries!

I am attaching a PDF (ClassicConfigPatrick.pdf) with the settings (screenshots and pics for those not accessible
via local app). Any recommendations will be very much appreciated.

Thank you -Patrick

Actually that was photo when I had it backwards - I swapped the cables and fixed it that way.
Larry

[ClassicCrazy]

I guess your settings look okay - but I didn't look up your particular battery to see if those are the recommended setpoints.
If you turn web access on ( if you have internet) you can then setup MyMidnite on their server to record your data and display it in graphs.
Larry

[Tucker Ridge]

Larry-
I got the set points from the battery manufacturer. Most of the rest are defaults which I won't touch until I install shunt and WBJ. If I have any questions about that, I'll start a new post.
I hope MN is paying you to be a "Hero" on the forum. Whatever the case, I owe you and would send remuneration (if there is a way, please let me know).
Clearly, I could never be a MN resource for you, my expertise is with MSSQL Server and Excel. If ever I can be of assistance in that arena, post a reply to this post and I'll be happy to help.

Many thanks for all your input and time, I've learned a lot!
In your debt -Patrick

[ClassicCrazy]

Larry-
I got the set points from the battery manufacturer. Most of the rest are defaults which I won't touch until I install shunt and WBJ. If I have any questions about that, I'll start a new post.
I hope MN is paying you to be a "Hero" on the forum. Whatever the case, I owe you and would send remuneration (if there is a way, please let me know).
Clearly, I could never be a MN resource for you, my expertise is with MSSQL Server and Excel. If ever I can be of assistance in that arena, post a reply to this post and I'll be happy to help.

Many thanks for all your input and time, I've learned a lot!
In your debt -Patrick

No problem - it wasn't any trouble.
Larry