News:

To visit MidNite Solar click this link www.midnitesolar.com

Main Menu

What is it?

Started by onanparts, March 12, 2013, 04:30:34 AM

Previous topic - Next topic

tecnodave

Close, but no cigar........old school road flare.......has wick to burn kerosene?


td
#1 Classic 150 12 x Sharp NE-170, 2S6P, 24volt L-16 Rolls-Surette S-530, MS4024 & Cotek ,  C-40 dirv.cont. for hot water
#2 Classic 150 12 x Sharp NE-170, 2S6P, 24 volt L-16 Interstate,Brutus Inv.
#3 Kid/WBjr 4/6 Sanyo 200 watt multilayer 4/6 P
#4 Kid/WBjr 4/6 Sanyo 200 watt multilayer 2S 2/3 P

onanparts

A look inside.....
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

Westbranch

KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

tecnodave

Camp heater........to early to be catalytic.....wick burns kerosene.
#1 Classic 150 12 x Sharp NE-170, 2S6P, 24volt L-16 Rolls-Surette S-530, MS4024 & Cotek ,  C-40 dirv.cont. for hot water
#2 Classic 150 12 x Sharp NE-170, 2S6P, 24 volt L-16 Interstate,Brutus Inv.
#3 Kid/WBjr 4/6 Sanyo 200 watt multilayer 4/6 P
#4 Kid/WBjr 4/6 Sanyo 200 watt multilayer 2S 2/3 P

Westbranch

more like tent heater...  It is a much older version of a kerosene heater than the one in our bunkhouse in the '70's
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

onanparts

Very very close. A heater yes, but me thinks you are all too young to have used one of these for it's designed application..... :)
Or at least too smart!
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

Rybren

#306
We used to use something similar to this to pre-heat the oil in our old Radial Engined DHC3 Beaver.  During the  coldest parts of winter, we'd drain the oil after a flight and then pre-heat it before the next one.  We sometimes used a heater like the one in the pic.  Sometimes, we'd just use the heater under the engine with a tarp or two to build a tent-like structure.
4 x 210W PV, Classic 150, e-panel, Samlex PST-1500-24, 232AH 24V

tecnodave

TJ

I'm from Alaska! Never seen one like that.....but we did use coleman Blazo stoves for that! Especially for our pony motor D-2!

td
#1 Classic 150 12 x Sharp NE-170, 2S6P, 24volt L-16 Rolls-Surette S-530, MS4024 & Cotek ,  C-40 dirv.cont. for hot water
#2 Classic 150 12 x Sharp NE-170, 2S6P, 24 volt L-16 Interstate,Brutus Inv.
#3 Kid/WBjr 4/6 Sanyo 200 watt multilayer 4/6 P
#4 Kid/WBjr 4/6 Sanyo 200 watt multilayer 2S 2/3 P

mike90045

#308
smudge pot, for laying down smoke in an orchard for frost protection

-edit-
Oh, I see someone already tried that.    So, that's what  I need for my listeroid to keep the crankcase from turning to jello in the winter.  No power to run an electric heater.
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

onanparts

#309
Not so easy this time.  ;D Input is 115 Volts AC 50/60 Hz or 100 Hz. Output 12-30 Volts DC.  :)
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

mike90045

Except for the PWB, it looks homebuilt.   variable power supply with 3 relays with swamping diodes on them.
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

onanparts

Quote from: mike90045 on September 05, 2014, 05:30:08 PM
Except for the PWB, it looks homebuilt.   variable power supply with 3 relays with swamping diodes on them.

I'll have to pass the homebuilt angle on to the manufacturer that's been in business for over 80 years.  :)

That should get a chuckle out of them.
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

mike90045

The wire bundle (it's not a harness) looks to be a mess.  Automotive crimps and such.  (I guess I did too much spacecraft work)
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

onanparts

Quote from: mike90045 on September 06, 2014, 12:32:36 PM
The wire bundle (it's not a harness) looks to be a mess.  Automotive crimps and such.  (I guess I did too much spacecraft work)

Welding in space? Maybe...:)

Miller Weld Control for use with a Spool type Mig Gun for welding aluminum.
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

onanparts

Up next......and no clues! :)
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I