My MidNite ver3

[Halfcrazy]

So Andrew has opened up My MidNite ver3 with WBjr support and advanced logging etc.

To use this site you need to use the same firmware used for MM ver2, here is a link on that: http://www.midniteforum.com/index.php?topic=2364.0

So the new website is at https://159.203.65.201

You will also need to change the DNS over ride on the classic from the old MM2 IP to 159.203.65.201 and save it and then reboot the classic.

Please post any odd behavior etc here

[ClassicCrazy]

Is the 50.57.186.168 ( ver2 ?)  site going to continue to work until I can get back out and change to the new Ver3 site ?

Larry

[Halfcrazy]

Yes Andrew will leave that one on line for some period of time

[Resthome]

So Andrew has opened up My MidNite ver3 with WBjr support and advanced logging etc.

To use this site you need to use the same firmware used for MM ver2, here is a link on that: http://www.midniteforum.com/index.php?topic=2364.0

So the new website is at https://159.203.65.201

You will also need to change the DNS over ride on the classic from the old MM2 IP to 159.203.65.201 and save it and then reboot the classic.

Please post any odd behavior etc here

So have the bugs on Classic Graphs been fixed on this firmware??

[Westbranch]

Download this file http://ryan.midnitesolar.com/install_1900.zip and unpack it some where that you can find it.

So I have Version FW 2056 and NW 2045  loaded.

Does this mean I have to go back to 19xx? 

FW V.2056 is a real gem, far better than the 19xx version I had...?

[Resthome]

Download this file http://ryan.midnitesolar.com/install_1900.zip and unpack it some where that you can find it.

So I have Version FW 2056 and NW 2045 loaded.

Does this mean I have to go back to 19xx?  FW V.2056 is a real gem, far better than the 19xx version I had...

Sounds like it. I'll just wait. Closing up this week for the winter. So hopefully tHey will have resolved before next spring.

[Westbranch]

Hi John,  I may just do the same unless Andrew or Ryan confirms that 2056 will work...  I am thinking it would as it is the progeny of the 19xx series that came out fast and furious, IIRC...


I think I will just change the IPA , not the ale   , in the Classic and try it...  that is easy to revert, much more so than a FW change...

[ClassicCrazy]

I doubt it will work - when I upgraded to that new firmware  the Mymidnite V2 didn't work and I had to go back to the firmware Ryan linked above.  I just got back so will try out this new Mymidnte v3 - guess all I need to do is change the server ip address.

This is what I am at now that works with mymidnite v2

Firmware:     
- Classic Rev: 1923
- Network Rev: 1824

Larry

[ClassicCrazy]

Looks like I am in on Mymidnite V3 - at least it let me log in and shows my serial number and stuff - but I have to wait awhile to let it gather some data.
All I did was change the IP using Local Status App.

Larry

[Westbranch]

I did get to the new MMV3  ( I guess) as I had to sign in as it did not recognise me..... so I signed in then Nada but there were 4 icons in the middle of the page, clicked first one , Nada, pressed second one and waited  for ~ 15 minutes for the data to transfer, once finished I closed connection and rebooted it, had to sign in again but no data shows???

logged of and resigned in now it lists my Cl 4592, if I click the 'key' or 'back arrow' it starts to reload the data again...??

guess I will see what it shows in the morning...

ADD:  I also am randomly getting a pop up message about AJAX errors...?

[ClassicCrazy]

I had forgotten to reset the power on my Classic - once I did that now it is talking to the mymidnite v3 and I can see some data now.

Larry

[ClassicCrazy]

So Andrew has opened up My MidNite ver3 with WBjr support and advanced logging etc.
Please post any odd behavior etc here

Seems to be working fine for me Ryan . Only thing I notice so far is Energy label says Wh instead of kWh .

Larry

[zoneblue]

Is that "1900" firmware now certifed beta? Or still alpha?

[Halfcrazy]

OK we have the new software for MM v3 and it has a couple fixes for EQ in it. (We know there is still an issue and Mario is getting close but I wanted to get this out there now)

http://bob.midniteftp.com/MidNiteSolarUpdate_2074_11-2-2015_v4.95.exe

[Westbranch]

Andrew, are these the right settings?  Your descriptions of what to change do not line up with what i in the L App..