Updating Firmware

Started by labusker, February 29, 2020, 09:36:41 AM

Previous topic - Next topic

labusker

I will be setting up my classic 150 soon. Can software be updated through the network cable or do I need to use the usb port?
Off Grid DIY, Adjustable Ground Mount, 2S3P 375W Mission Solar, MNPV6-Disc, MNDC125, Classic 150, Aims 48V Inverter/Charger, 8 370Ah Duracell 6V batteries in series

boB


Hi.   The Classic needs to have its firmware updated through USB at the moment

K7IQ 🌛  He/She/Me

labusker

Thanks for the quick reply. I have ordered a mini usb to mini usb for that task.
Off Grid DIY, Adjustable Ground Mount, 2S3P 375W Mission Solar, MNPV6-Disc, MNDC125, Classic 150, Aims 48V Inverter/Charger, 8 370Ah Duracell 6V batteries in series

boB

Quote from: labusker on February 29, 2020, 07:12:21 PM
Thanks for the quick reply. I have ordered a mini usb to mini usb for that task.

Yes, that is how it's done.  Let us know of course if you have problems in the update.

K7IQ 🌛  He/She/Me

labusker

is there any monitoring software out there that an iPad can use?
Off Grid DIY, Adjustable Ground Mount, 2S3P 375W Mission Solar, MNPV6-Disc, MNDC125, Classic 150, Aims 48V Inverter/Charger, 8 370Ah Duracell 6V batteries in series

boB


As far as I know, Adobe Air (API) should still work on Apple products and iPads.

If you can install Adobe Air, then you can install the MidNite Solar Local App

The Local App is monitoring software for the Classic charge controllers.

K7IQ 🌛  He/She/Me

mike90045

Quote from: boB on March 03, 2020, 01:14:39 AM

.......The Local App is monitoring software for the Classic charge controllers.

And Control.  And register downloads. (Settings/Configuration) and register uploads.  Way more than simply monitor
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV